Liner & Coating Conversions

Convert painted and vinyl-lined pools to fibreglass

Fibreglaze removes unsuitable coating as required or removes the liner in full, assesses the exposed substrate and prepares it for a continuous reinforced fibreglass lining where conversion is suitable.
CHOOSE THE RIGHT PATH

Repaint, replace the liner—or convert to fibreglass?

A further paint system or replacement liner may suit a sound pool where the owner wants to retain that finish. Fibreglass conversion is a more advanced scope, which significantly improves longevity and appeal: it removes the unsuitable coating or flexible liner, exposes and prepares the underlying structure, and integrates suitable repairs into one continuous lining.

Painted pool

A paint coating applied over a concrete or rendered pool interior.

Paint may chalk, fade, blister or peel. Conversion removes loose or unsuitable coating so cracks, pitting and defects in the exposed substrate can be treated before lining.

Vinyl-lined pool

A flexible liner fitted over concrete, panel, metal or mixed construction.

The liner conceals much of the supporting pool. Conversion removes it so corrosion, cracks, damaged areas, fittings and transitions can be assessed, repaired or adapted before a continuous lining is installed.

Not sure whether your interior is paint, fibreglass or a liner? Send clear overall and close-up photographs. They will usually help us identify the visible finish and failure pattern, but they cannot confirm the concealed substrate. Do not empty the pool or remove the liner simply to investigate.

If the finish appears to be fibreglass or gelcoat, or Pebblecrete, Marblesheen or tile, start with the matching grouped page.

WHAT REMOVAL REVEALS

The visible failure may not be the complete problem

Paint partly conceals the substrate; a vinyl liner conceals most of it. Controlled removal establishes whether the supporting pool is sound and what repairs or adaptations are required.

PAINTED INTERIOR

Separate coating failure from substrate defects

The coating system, adhesion and compatibility are assessed before unsuitable material is removed and the exposed cement-based interior is reviewed.

1

Assess the coating

Review chalking, blistering, peeling, earlier layers, adhesion and visible repairs.

2

Remove unsuitable paint

Take loose, chalking, blistered, contaminated or incompatible coating back as required.

3

Repair and level the base

Treat exposed cracks, pitting, hollow areas and irregular previous repairs before lining.

VINYL-LINED INTERIOR

Expose and assess the supporting structure

The liner and redundant fixing components are removed so the concrete, panels, metalwork, fittings and transitions beneath can be inspected.

1

Remove the liner

Take out the flexible liner and redundant components required for the existing system.

2

Inspect the concealed pool

Check for corrosion, cracks, voids, damaged panels, moisture and movement.

3

Adapt, repair and level

Treat the substrate, fittings, penetrations and transitions according to their condition.

The conversion scope is confirmed after removal

The prepared substrate and required repairs are integrated into a continuous reinforced fibreglass lining and selected AquaGuard finish—the visible outcome of the ENDURATEC System. Plumbing, drainage, groundwater, active movement or other conditions outside the lining may require separate work.

RELEVANT POOL PROBLEMS

Common problems that a conversion can solve

Failed liners and coatings can share symptoms such as fading, roughness, cracking or water loss, but the cause and treatment can be very different. 

Fibreglaze logo iconA single-colour Fibreglaze logo icon designed to inherit its colour from the embedding widget.

Failed Vinyl-liner

Ageing vinyl liners can fade, wrinkle, stretch, split or pull away from fittings and tracks. Removing the liner allows the concealed pool structure to be inspected before repair, levelling and conversion to a reinforced fibreglass interior.
Fibreglaze logo iconA single-colour Fibreglaze logo icon designed to inherit its colour from the embedding widget.

Wearing & Fading

A faded, chalky or worn pool surface can become rough, porous and harder to keep clean. The condition should be assessed before resurfacing so weak material is removed and underlying defects are repaired.
Fibreglaze logo iconA single-colour Fibreglaze logo icon designed to inherit its colour from the embedding widget.

Rough, Stained or Dated

Staining, roughness and an outdated finish can make a sound pool unpleasant to use and difficult to maintain. The underlying cause must be identified before the surface is cleaned, levelled and restored.
Fibreglaze logo iconA single-colour Fibreglaze logo icon designed to inherit its colour from the embedding widget.

Cracks

Pool cracks range from fine surface crazing to movement-related shell damage. An inspection is needed to identify the crack type, determine whether movement is continuing and select a repair that addresses more than the visible line.
Fibreglaze logo iconA single-colour Fibreglaze logo icon designed to inherit its colour from the embedding widget.

Leaks

Unexpected water loss can come from plumbing, fittings, cracks, tile joints, liners or the pool shell. Confirming the source before repair prevents resurfacing from being used where a plumbing or site solution is required.

Conversion removes liner tears, seams, wrinkles or unsuitable coating from the finished interior, but it does not automatically resolve plumbing, fitting, groundwater, corrosion, movement or external structural causes. These require their own assessment and scope.

CONVERSION PROJECTS

Painted and vinyl-liner conversions in practice

The vinyl-liner example below is a current published project. The Painted Pool card is ready for the approved project photographs, details and link that will be added later.

Add before image
Add completed image
PAINTED POOL

Elanora, QLD

This painted concrete pool had a worn, patchy coating, which was mechanically prepared and levelled with resin filler. Two layers of fibreglass laminate was then applied and finished in Sapphire Blue Speckle.

Before
Completed
VINYL-LINED POOL

Manly West, QLD

The deteriorated liner was removed, tiled and uneven areas were prepared and repaired, and the exposed interior was levelled before the continuous reinforced lining and Dove Grey Speckle AquaGuard finish were installed.

REQUEST AN ASSESSMENT

Not sure whether to repaint, replace or convert?

Share whether the pool is painted or vinyl-lined, its visible condition and any previous repainting, liner replacement or repairs. Clear overall and close-up photographs usually help us identify the finish and visible failure before the first conversation.

The final conversion scope is confirmed only after planned removal and inspection of the exposed substrate.

Current finish, approximate pool size and access
Peeling, chalking, tears, wrinkles, cracks or known leaks
Previous coating or liner work plus clear photographs
YOUR POOL

Tell us about your pool

Liner and coating conversion enquiry

Pool Types
Services & Finishes
Common Pool Problems
Commercial Pool Services
Projects & Resources
Need help with your pool?

Send us a few photos and our team can help identify the likely issue and the most suitable next step.

Servicing QLD and NSW